Skip to content
GOLDENRefractories Pvt. Ltd.

Ramming Mass Glossary: 25 Terms Every Melt Shop Uses

A plain-language glossary of induction furnace lining terms, from binder and former to sintering and slag line.

BUYER GUIDES

A quick reference for the words used around induction furnace linings.

Material terms

  • Ramming mass: dry granular refractory installed by ramming or vibrating.
  • Silica / SiO₂: the main component of acidic ramming mass.
  • Quartzite: a hard rock made mostly of quartz grains.
  • Binder: an additive that helps the lining sinter, usually boric acid or boron oxide.
  • Boric acid (H₃BO₃): a common binder that turns into boron oxide when heated.
  • Boron oxide (B₂O₃): the active binding phase, used directly in some grades.
  • Premix: ramming mass supplied with binder already mixed in.
  • Non-premix: ramming mass supplied without binder.
  • Granulometry: the grain size distribution of the mass.
  • Fines: the smallest particles in the mix.

Furnace terms

  • Coreless induction furnace: a furnace with a coil around a crucible, no core.
  • Coil: the water-cooled copper conductor that creates the induction field.
  • Coil grout: the cement layer protecting the coil.
  • Former: the steel shell that shapes the lining during ramming.
  • Crucible: the lined space that holds the metal.
  • Nali / spout: where metal pours out.
  • Slag line: the band where slag sits; often the fastest-wearing part.

Lining terms

  • Sintering: bonding grains together by heat.
  • Sintered zone: the dense hot face.
  • Fritted zone: the partly bonded middle layer.
  • Loose zone: the unsintered back layer near the coil.
  • Campaign: the number of heats a lining lasts.
  • Penetration: metal entering cracks or pores in the lining.
  • Ground leak detector: a system that warns when metal approaches the coil.
  • Relining: removing the old lining and installing a new one.