Choosing a Ramming Mass Grade by Furnace Size
Small and large induction furnaces need different ramming mass gradings. Here is how furnace size affects the grade you should buy.
Induction furnaces range from a few hundred kilograms to many tonnes. One grade of ramming mass rarely suits them all.
Why size matters
- Wall thickness changes with furnace size, and so does the temperature gradient across it.
- Larger furnaces have more metal pressure on the lining and stronger stirring.
- Heat cycles differ: a small furnace may cool and reheat more often.
How grading changes
Suppliers usually adjust the proportion of coarse, medium and fine grains to the furnace capacity. Larger furnaces generally benefit from a well-graded mix with a strong coarse skeleton, while very small furnaces may use a slightly finer mix.
Other factors besides size
- What you melt: mild steel, alloy steel, cast iron.
- Tapping temperature and holding time.
- Daily heats and whether the furnace runs continuously.
- Your sintering practice.
- Binder preference: boron oxide, boric acid premix, or non-premix.
What to share with your supplier
- Furnace capacity and make.
- Number of furnaces.
- Current grade and binder level.
- Typical lining life in heats.
- Any recurring problems: cracks, penetration, erosion at the slag line.
Send those details on WhatsApp or through our enquiry form and we will recommend a grade to start with.