Induction Furnace Lining Thickness: A Balancing Act
A thicker lining protects the coil but reduces capacity and efficiency. Learn the trade-offs and how wear is monitored.
Lining thickness is set by the furnace design, and it is a compromise.
Why not just make it thicker?
- A thicker wall leaves less room for metal, so capacity per heat drops.
- The coil is further from the metal, which can reduce electrical efficiency.
- More material is used at every reline.
Why not thinner?
- Less protection between metal and coil.
- Shorter campaigns before the wall reaches its minimum.
- Less margin for cracks and erosion.
Follow the furnace maker
The furnace manufacturer specifies the former size and the minimum safe wall thickness. Use those figures.
Monitoring wear
- Measure the inside diameter at set points after a fixed number of heats.
- Watch the slag line, which usually wears fastest.
- Use ground leak detection where fitted.
- Track power per tonne.
Uneven wear
If one side wears faster, check former centring, ramming consistency and charging habits. Uneven wear is usually a process issue, not a material one.