Skip to content
GOLDENRefractories Pvt. Ltd.

Premix vs Non-Premix Ramming Mass: Which One Suits Your Shop?

Premix ramming mass arrives with binder already mixed in. Non-premix lets you add your own. Compare the two for an induction furnace.

FURNACE LINING

Silica ramming mass is sold in two common forms. The difference is simply where the binder is added.

Premix ramming mass

Premix arrives with the binder, usually boric acid, already blended into the graded silica at the plant. You open the bag and ram the lining.

  • Consistent binder level in every bag.
  • Less handling and mixing at site.
  • Fewer chances of mixing errors between shifts.

Non-premix ramming mass

Non-premix is graded silica without binder. The melt shop adds binder at site to its own recipe.

  • Full control over binder percentage.
  • Useful for shops that have tuned a recipe for their furnace over years.
  • Needs careful, thorough mixing, or binder ends up uneven across the lining.

How to choose

  • If you want consistency and speed, choose premix.
  • If you have an experienced team and a proven in-house recipe, non-premix gives you control.
  • If you are troubleshooting, premix removes one variable.

A third option

Boron oxide-based ramming mass is also premixed, but with boron oxide as the binder instead of boric acid. Read our article on boron oxide vs boric acid for the difference.

Whichever you choose, keep the mass dry, use it in the order it arrived, and follow a consistent ramming and sintering routine.